192.168.1.1 (192.168.0.1) are commonly used default IP addresses for entering the router settings page. It is also called “Router web interface”, “Configuration page”, “Router Settings page”, etc. First of all you should see the login page when you are to enter login and password and then you should be taken to settings web interface. Users often ask why cannot I access router settings via 192.168.1.1 or even a login page. You may face such errors as: “ERR_CONNECTION_TIMED_OUT” or “Page unavailable 404”. Below we will mention all possible reasons why your router configuration or login page might be unavailable and give some pieces of advice on how to gain access to your router settings at 192.168.1.1 or 192.168.0.1.
Here what you need to know first. To be able to access config page you need either to connect via Wi-Fi or via the Ethernet cable to LAN port.
Do not connect the ethernet cable to ports labelled “WAN” or “Internet”!
Wrong IP address
If you input wrong IP address you will surely get the error:
This site can't be reached. 192.168.1.1 took too long to respond. ERR_CONNECTION_TIMED_OUT
How to find the correct router’s IP?
So, first ensure you are trying to acces your router using the correct IP address. The IP address may be different from default value such as 192.168.1.1. Even if 192.168.1.1 is printed on the back of the device it might have been changed in the past by anyone who accessed the device. To find the IP address of your router:
Default gateway = your router’s IP address. In our example the gateway IP address is not 192.168.1.1 but 192.168.43.1 cause we are connected to a mobile hotspot on Android and the smartphone acts as a router:
Check if you are typing correct login and password. However, if you type wrong credentials you would be told “wrong username or password” or will see the login request but you won’t see “error 404”:
Check the sticker on your router’s back panel to find the factory default IP, username and password:
If you have lost a manual to your router, there is no sticker on its back with default credentials or you cannot find the gateway IP address for some reason, you may try the following credentials.
Most common default router IP-addresses:
Most common credentials:
The most spread router IP addresses are 192.168.1.1 and 192.168.0.1. The most spread credentials are: “admin/admin” or “admin” with an empty password.
In modern routers you might need to type
https://192.168.1.1 instead of
http://192.168.1.1. Try this.
Very often a glitch on your router can prevent you from logging in to its settings page. The webinterface can become unavailable after a long period of work without reboot. So, power cycle your router, wait for two minutes and try to access the login page once again:
Make sure all your smartphones are disconnected from your PC, because this can play a trick on you. For instance, if you connect your iPhone to your PC using the USB cable just for charging purposes, it can start working as a USB modem (if the tethering is enabled) and your PC will change the default gateway from your Wireless router IP-address to your iPhone’s one. In such a case you will never be able to access the router settings page even if you enter the right IP-address, username and password. The same can happen with Android phone or tablet because they can act as USB modems too.
First of all try another browser to access router’s configuration page at 192.168.1.1 or another IP address. Check browser settings and make sure:
At last reset browser’s settings:
Common network problem can be the reason why you cannot access router config page. So, please check the following things:
If you are an unexperienced user in networking, we recommend that you use NetAdapter Repair All In One utility to automatically solve such problems:
Damaged ethernet patch cord can be the reason why you cannot access your router login page on http://192.168.1.1.
It is obvious that if you can open all websites on the Internet but only the router web interface this means your cable is likely to be okay.
If you have tried everything but nothing helps to access the router settings on the web interface, you have to try resetting your device to the factory defaults. In most cases you should press and hold the hidden RESET button for 15-30 seconds while the router is powered on:
Ensure you are not entering a space before the IP address. You’d better enter the whole URL http://192.168.1.1 into the address bar:
If you enter 192,168,1,1 with commas instead of dots…
The correct IP address is 192.168.1.1 (but not 192.168.l.l or 192.168 ll or 192.168 o 1) IP-address can contain digits only – not letters!
Okay, let’s say you don’t remember your credentials or even you want to set up the unfamiliar device. Well, the shortest way to open http://192.168.1.1 and access the configuration page of any router is:
Tell us in the comments which tip helped you access router settings page.